learn driving

4 th thing to remember ?

2009-02-26T20:14:00.000-08:00

hi friends ,
today i am going to discuss about gear change or shifting .
1)when you start the car you are in 1 st gear.
2)after that when you go to the out range of 0-10 km then go to the next gear that is second gear .
3)if you don't go to the second gear & still keep driving you car engine is going to be heated for your own fault.
4)again if you remain in a speed around 10 km constantly then you should be in 1 st gear or you would heat the engine .

drive safely & stay in contact ...........................................................

2009-02-25T22:13:00.000-08:00

3rd thing to remember ?

2009-02-25T22:07:00.000-08:00

what is the similarity between 1 st & 2 nd gear ?

1)you should release the clutch & press the gas gear to accelerate the car .

what is the difference between 1 st & 2 nd gear ?

1) speed is the main factor in it .in first gear you would have low speed & in 2 nd gear you would get better speed .
2) now the fact is when speedbraker comes in action ,if you are going in 2 nd gear then you should move to first gear with clutch pressed & right leg in the brake to decrease the speed of the car .

what to do 2 nd ?

2009-02-25T21:47:00.000-08:00

well already i told you how to start the car .when the car starts to move
1) release the clutch slowly & press the gas paddle slowly.
2)this will increase you car speed .
3)if you are in first gear then after speeding up ,turn on the 2 nd gear .
4) when you want to shift to the 1 st gear again ,press the clutch quickly & change the gear .
5) when you are changing gear you should look at front ,not to the gear if you want to avoid accident .
6)if you see that the car in front of you started to show red light ,that means it is slowing down & braking .
7) at that moment press the clutch quickly & press the brake slowly .dont press the brake quickly cause it may confuse the driver behind you & he can blow your car's bumper .

always drive safely

what to do first?

2009-02-23T22:22:00.000-08:00

here is the first thing -
1)sit in the driving seat
2)place your left leg in the clutch & right leg in the gas paddle
3)start the engine with the key
4)now press the gear to 1 st one
5)now press the clutch to 100 % & the gas paddle to 40 -50%
6)now put the hand brake down
7)now release the clutch slowly until the car starts to move
8)when it stats to move slowly start to press the gas paddle
9)this would make your car to go in desired speed
10)press the clutch to 100% & then press the brake to stop the car now
11) if you do not press the clutch to 100 % & at that moment you press the brake then the engine would stop .
12)when you are going in first gear it is not necessary to always press the clutch ,this is same to 2 nd gear .

i would discuss about it more in my upcoming posts . till then goodbye .

Classification of driving

2009-02-21T01:03:00.000-08:00

driving is of 2 kinds .

1)manual driving
2)auto driving

the names define why they are different. i divided the driving in consideration of gear control. in the manual driving you have to control the gear but in the auto driving the car automatically shifts from one gear to another .

so now the question is what is a gear ?

a gear is the speed controlling device.in manual driving you would see a stick which a driver pulls in .yeah .that stick is the gear .i would discuss about gear in my upcoming posts

driving is not tough

2009-02-20T23:38:00.000-08:00

hi my friends ,
many people thinks that driving is tough .but to me it is not so tough . driving needs some concentration & hard work .the most important thing is practice .if you do practice everyday ,i would say you are in right path. i am learning driving in a driving school .here i am going to share my opinions over driving .so don't worry . i am always here to help you.see you all .bye